Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock
Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock

Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock

In stock
P/N
CL-W312-CU00SW-A
USD$249,99
An RGB designed waterblock for ASUS ROG STRIX RTX 3070 graphic card that supports the TT RGB PLUS software, which not only cools down your GPU but brings out the best visual effects on your build.

Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock

The Thermaltake Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock is a transparent waterblock designed for the latest ASUS ROG STRIX RTX 3070 graphic cards. It supports TT RGB PLUS software and displays 16.8M RGB lighting effects that help your GPU stand out from other builds.

 
 
 
 
 

TT RGB PLUS Software

2.0 - New version of Thermaltake’s TT RGB PLUS patented software, providing more lighting effects and PC monitoring functions.
1.0 - Thermaltake’s patented software to synchronize TT RGB PLUS products with addressable LEDs.
Caution: TT RGB PLUS 2.0 and TT RGB PLUS 1.0 will overwrite one another; users can only install one version of TT RGB PLUS.

2.0 DOWNLOAD NOW 2.0 USER MANUAL
1.0 DOWNLOAD NOW   1.0 LEARN MORE  

Sync with Razer Chroma Lighting

All Thermaltake TT RGB PLUS products are able to connect into the Razer Chroma ecosystem, Razer Synapse 3. Users can experience synchronized gaming and RGB lighting effects on their TT RGB PLUS liquid cooling system and Razer gaming gear!

LEARN MORE

Works with Amazon Alexa

All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to give voice commands to the Alexa-enabled devices.

LEARN MORE

TT AI Voice Control

Give you full control over the TT RGB PLUS products with your voice. “SyncALL, Say”Hello TT”.

Note: TT AI Voice control, Razer Chroma and Amazon Alexa requires the use of at least one TT RGB PLUS software-enabled product to function.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
More Information
P/N CL-W312-CU00SW-A
Dimensions 29.2 H x 159.4 W x 268 L mm
Weight 1600 g
Interface USB 2.0 connectors (9 Pin)
System compatibility Windows 7 / 8 / 8.1 / 10
Power Input 6.5 W
Compatibility ASUS : ROG STRIX RTX 3070
Material Copper + Acrylic
Started Voltage 5 V
Threads G ¼”

User Manual

  • File Name
  • Description
  • Size
  • Version
  • Release Date